Are you looking to give your standing seam metal roofing maintenance? You’ve come to the right place. Normally, maintenance services tend to be overlooked, so if you’re interested in knowing more about the correct ways of keeping your seam metal roofing in outstanding conditions, keep reading.
Below you’ll find the best tips to give your standing seam metal roofing the proper maintenance.
6 Tips To Give Your Standing Seam Metal Roofing The Right Maintenance
Repair Minor Scratches
The best way to maintain your standing seam metal roofing is by repairing any minor scratches and dents that may occur; this can be done with a simple sealant or touch-up paint, but make sure the product you use is compatible with the material of your roofing system.
Fix Rusts Spots
If you notice any rust spots, it’s important to take care of them as soon as possible. A wire brush and some cleanser can usually do the trick, but make sure to neutralize the area with a metal primer after you’re done.
Watch Out For Corrosion
During a roof inspection, experts analyze roofing components located around HVAC systems and ventilation zones. The steam, heat, and chemicals emitted by vented appliances can damage the paint on your roof and cause the panels to rust. To avoid this, make sure the different metals aren’t in contact with one another.
Fix Broken Panel Seams
Moisture could easily seep through the gaps and into your home if the panel seams have become loose or are starting to separate. Ensure that the panel seams are checked and fixed, if necessary, during roof maintenance.
Clean The Gutters & Drains
Leaves, twigs, and debris can accumulate in your gutters. They may clog and fill your gutters with water over time as they gather. Excess moisture can damage metal roofing and attract pests inside. As a result, while giving maintenance to your roof, make sure to pay attention to your gutter system as well.
Clean The Metal Panels
In general, you can clean metal panels with dish soap and water, but always follow the manufacturer’s cleaning instructions for the best results. Make sure you have a microfiber cloth on hand because you’ll be wiping off the metal panels with it. With a garden hose, you can easily remove the soap.
To avoid causing damage to your roof, we recommend hiring a professional to clean your metal panels.
Get The Right Maintenance With Professional Roofers
At One Oak Exteriors, we’re the pros of keeping your standing seam metal roofing in great condition. When you reach out to us to hire our services, we’ll do everything possible to provide you with an excellent experience. Our staff is well-prepared, they’ll assist you and answer any doubt you may have. Don’t hesitate and contact us today!
GIVE YOUR STANDING SEAM METAL ROOFING MAINTENANCE TODAY
